Demir Bayka, Prof. Dr., Bölüm Başkanı

Demir Bayka

İletişim Bilgileri

Telefon:8559
Ofis:C-Blok No: 615
Bağlı Olduğu Bölüm:Otomotiv Mühendisliği
http://www.atilim.edu.tr/~dbayka

Akademik Dereceler

DereceAlanÜniversiteYıl
Doktora Makine Mühendisliği Manchester Üniversitesi 1980
Yüksek Lisans Makine Mühendisliği Orta Doğu Teknik Üniversitesi 1971
Lisans Makine Mühendisliği Orta Doğu Teknik Üniversitesi 1968


Akademik Ünvanlar

DereceÜniversiteAyYıl
Profesör Middle East Technical University Haziran 1989
Doçent Middle East Technical University Haziran 1985
Yardımcı Doçent Middle East Technical University Haziran 1977


Araştırma Konuları

Mekanik Tasarım ve Üretim, Kontrol Teorisi, İçten Yanmalı Motorlar, İçten Yanmalı Motor Tasarımı, Emisyon İyileştirme, Elektrikli Taşıtlar, Bilgisayar Destekli Üretim (BDÜ), Bilgisayar Destekli Tasarım (BDT), Alternatif Enerji Kaynakları (Yakıtları)


Yayınlar

SCI, SCI-E, SSCI ve AHCI

Bayka, D., Özdemir,A. (2010), Experimental Investigation Of Use Of Canola Oil As A Diesel Fuel, UMTIK 2010, 14th International Conference on Machine Design and Production

Bayka, D. (2005), Gasoline Engine With Low Emission And High Combustion Efficiency, 1st International Conference on Air Pollution and Combustion (CAPAC 2005)

Bayka, D. (1993), A Simulation Model For Calculating The Flame Propagation And Spatial Gas Composition In Spark Ignition Engines, Modelling, Measurement & Control, AMSE Press

Bayka, D. (1992), Performance And Emission Characteristics Of Diesel Engines With CNG And Pilot Injection, International Journal Of Energy - Environment - Economics

Bayka, D. (1992), Use Of Natural Gas In Motor Vehicles, International Journal Of Natural Gas Technology And Piping

Bayka, D. (1990), Improvement Of The Performance Of A Single Cylinder Spark Ignition Engine By Operational Factors, Journal Of Thermal Science And Technology

Bayka, D. (1981), Instantaneous Heat Transfer in a Single Stroke Rapid Compression Machine, METU, Journal of Pure and Applied Sciences

Diğer Hakemli Dergiler

Bayka, D., (2007), Doğal Gazın Taşıtlarda Yakıt Olarak Kullanımı, Doğal Gazın Taşıtlarda Yakıt Olarak Kullanımı, ankara, 1, pp

Bayka, D. (2007), Doğal Gazın Taşıtlarda Yakıt Olarak Kullanımı, LPG-CNG Kongresi, Makina Mühendisleri Odası

Uluslararası Konferans Bildirileri

Bayka, D. (2010), Experimental Investigation Of Use Of Canola Oil As A Diesel Fuel, UMTIK 2010, 14th International Conference on Machine Design and Production

Bayka, D., Mehdiyev,R.,Wolanski,P.,Güdü,T.,Arslan, H. (2005), Gasoline Engine With Low Emission And High Combustion Efficiency, 1st International Conference on Air Pollution and Combustion (CAPAC 2005), ankara, 1, pp

Bayka, D., Karel, A.,Çakar,D. (2005), Operation Of A Spark Ignition Engine With Superheated Fuel Vapor, The 18th Internal Combustion Engine Symposium, Society Of Automotive Engineers Of Japan, South Korea, 1, pp

Bayka, D. (2005), Operation Of A Spark Ignition Engine With Superheated Fuel Vapor, The 18th Internal Combustion Engine Symposium, Society Of Automotive Engineers Of Japan

Bayka, D., Karel, A.,Çakar,D. (2000), Determination of the Size of the Air Pollution Across Turkey Created by Vehicles in the Land Transport Sector, IASTED International Conference on Applied Simulation and Modelling, South Korea, 1, pp

Bayka, D. (2000), Determination of the Size of the Air Pollution Across Turkey Created by Vehicles in the Land Transport Sector, IASTED International Conference on Applied Simulation and Modelling

Bayka, D. (2000), A Reverse Engineering Method for Design of Engine Components, IASTED International Conference on Modelling and Simulation

Bayka, D. (1996), Simulation Of The Thermodynamic Cycle In A Spark Ignition Engine With Emphasis On Combustion Chamber Geometry, IASTED International Conference, Modelling and Simulation, Pittsburgh, USA

Bayka, D. (1996), Simulation Of The Thermodynamic Cycle In A Spark Ignition Engine With Emphasis On Combustion Chamber Geometry, IASTED International Conference, Modelling and Simulation

Bayka, D. (1995), Simulation Of Combustion Process In A Spark Ignition Engine On A Personal Computer, ECOS'95, Proc. of The Int. Conf

Bayka, D. (1994), The Performance Evaluation Of Engines Used in Ankara Natural Gas Conversion Project, The 4th Biennial International Conference & Exhibition On Natural Gas Vehicles

Bayka, D. (1994), Simple And Effective Solution To Smoke Emission From Buses For Developing Countries, 4th Biennial International Conference & Exhibition On Natural Gas Vehicles

Bayka, D. (1993), Thermal Boundary Layer Measurements Using A Multiple Thin Wire Resistance Thermometer In An Internal Combustion Engine, Third World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics

Bayka, D. (1992), Conversion Of A City Bus To Dual Fuel And Evaluation Of Its Performance, IGRC 92, 1992 International Gas Research Conference

Bayka, D. (1991), Effect of Inlet Manifold Design and Increase of Compression Ratio on the Performance and Exhaust Emissions of a 1300 cc SI Engine using Methanol-Ethanol-Water-Gasoline Blends, 9th Miami International Congress on Energy and Environment, Environment and Energy

Bayka, D. (1991), Operation Of A Diesel Engine With Compressed Natural Gas, Symposium on the Use of CNG and LPG as Fuel for Internal Combustion Engines

Bayka, D. (1983), A Droplet Evaporation Rate Controlled Combustion Model, AGARD, Combustion Problems in Turbine Engines

Bayka, D. (1982), Instantaneous Heat Transfer in a Single Stroke Rapid Compression Machine, ASME Heat Transfer Conference

Ulusal Konferans Bildirileri

Bayka, D. (2000), A Reverse Engineering Method for Design of Engine Components, IASTED International Conference on Modelling and Simulation, Pittsburgh, USA