Eren Billur, Asst. Prof. Dr.

Eren Billur

Contact Information

Phone:8715
Phone:+90 312 586 8715
Office:A-Blok No: 2054
Home Department:Department of Automotive Engineering
Detailed CV

Academic Degrees

DegreeFieldUniversityYear
PhD of Philosophy Mechanical Engineering The Ohio State University 2013
Master's of Science Mechanical Engineering Virginia Commonwealth University 2008
Bachelor's of Science Mechanical Engineering Baskent University 2007


Academic Titles

DegreeUniversityMonthYear
Asst. Prof. Atılım University September 2014


Research Topics

Sheet Metal Forming, Hot Stamping (Press Hardening), Warm Forming, 2nd and 3rd generation AHSS, Automotive materials, Material characterization, Finite element analysis.


Publications

SCI, SCI-E, SSCI and AHCI

E. Billur, Y. Demiralp, A.R. Groseclose, T. Altan, B. Wadman (2011), Factors Affecting the Accuracy of Flow Stress Determined by the Bulge Test, Steel Research International, ICTP 2011 Special Edition, pp. 726-731

M. Koç, S. Mahabunphachai, E. Billur (2011), Forming characteristics of austenitic stainless steel sheet alloys under warm hydroforming conditions, Int. J. Adv. Manuf. Technol., Vol. 56, No: 1-4, pp. 97-113

M. Koç, E. Billur, Ö.N. Cora (2011), An experimental study on the comparative assessment of hydraulic bulge test analysis methods, Materials & Design , 32, pp 272-281

International Conference Proceedings

E. Billur, G. Durkaya, B. Çetin, M.M. Yılmaz, A. Atay, A.G. Oğuz, O. Onaylı, U.C. Yalazı, E. Kılcı, (2016), Investigation of The Effect of Servo-Press Forming in Springback and Minimum Bending Radii of Ultra High Strength Steels, 17th International Conference On Machine Design And Production (UMTIK 2016), Bursa, Turkey

E. Billur, B. Çetin, R.O. Uğuz, K. Davut, E. Arslan (2016), Advanced Material Characterization of TWIP Steels, in proceedings of New Developments in Sheet Metal Forming 2016 (NEBU 2016), Stuttgart, Germany, pp 303-318

E. Billur, H. Porzner, D. Lorenz, M. Holecek, M. Vrojlik, M. Hoss, B. Damenha, J. Friberg, C. Koroschetz , M. Skrikerud (2015), From Concept to Virtual Reality: Virtual Hot Forming Engineering, Proceedings of 5th International Conference on Hot Sheet Metal Forming (chs2 - 2015), Toronto, ON, Canada, pp 463-470

E. Billur, B. Çetin, M.M. Yılmaz, A.G. Oğuz, A. Atay, K. Ersoy, R.O. Uğuz, B. Kaftanoğlu (2015), Forming of New Generation AHSS Using Servo Presses, Proceedings of 5th International Conference on Accuracy in Forming Technology (ICAFT 2015), Chemnitz, Germany, pp 175-191.

E. Billur (2014), Producing Ultra High Strength Automotive Components: Hot Stamping of Boron Alloyed Steels vs. Cold Stamping of New Generation Steels, 2nd International Metal Forming Conference (MetForm 2014), Ankara, Turkey

E. Billur, C. Wang, C. Bloor, M. Holecek, H. Porzner, T. Altan (2014), Advancements in Tailored Hot Stamping Simulations: Cooling Channel and Distortion Analyses, The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2014), Melbourne, Australia, AIP Conference Proceedings, Vol. 1567 , pp. 1079-1084

E. Billur, A. Groseclose, T. Mao, T. Altan (2013), Current Applications of FE Simulation for Blanking and Stamping of Sheet Materials, Tools and Technologies for Processing Ultra High Strength Steels, Graz, Austria, pp 221-238

E. Billur, H. Porzner, T. Altan (2013), Virtual Prototyping of Lightweight Designs Made with Cold and Hot Formed Tailored Solutions, 2nd World Congress on Integrated Computational Materials Engineering (ICME 2013), Salt Lake City, UT, USA, pp 49-54

T. Altan, A. Groseclose, E. Billur, S. Subramonian, T. Mao (2013), Advances and Challenges in Sheet Metal Forming Technology, 7th International Conference on Design and Production of Machines and Dies/Molds, Antalya, Turkey, pp 1-6

R. Perez-Santiago, E. Billur, A. Ademaj, C. Sarmiento, R. Berlanga, T. Altan (2013), Hot Stamping of a B-Pillar with Tailored Properties: Experiments and Preliminary Simulation Results, 4th International Conference on Hot Sheet Metal Forming (chs2 - 2013), Luleå, Sweden, pp 83-90

E. Billur, H. Porzner, M. Holecek, T. Altan (2013), Virtual Prototyping of Hot Formed Tailored Light-weight Designs, 4th International Conference on Hot Sheet Metal Forming (chs2 - 2013), Luleå, Sweden, pp 303-310

T. Altan, E. Billur, H. Porzner, D. Dooge, Y. Vincent, H. Porzner (2013), Concurrent Engineering with Hot and Cold Formed Tailored Solutions, International Automotive Body Congress (IABC 2013), Frankfurt, Germany, pp 91-112

M. Shah, E. Billur, P. Sartkulvanich, J. Carsley, T. Altan (2011), Cold and warm hydroforming of AA5754-O Sheet: FE Simulations and Experiments, The 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2011), Seoul, S. Korea, AIP Conference Proceedings, Vol. 1383, pp 690-697

E. Billur, T. Altan (2010), Challenges in Forming Advanced High Strength Steels, New Developments in Sheet Metal Forming 2010, Stuttgart, Germany, pp 285-304

E. Billur, S. Mahabunphachai, M. Koç (2009), Formability of Austenitic Stainless Steels under warm hydroforming conditions, Transactions of NAMRI/SME, Clemson, SC, USA, Vol. 37, pp 341-348

E. Billur, M. Koç (2008), A comparative study on hydraulic bulge testing and analysis methods, ASME Conf. Proc., Manufacturing Science and Engineering Conference (MSEC 2008), Evanston, IL, USA, pp 59-65

Book Chapters

E. Billur (2016), Chapter 12: Hot Formed Steels, “Automotive Steels - Design, Metallurgy, Processing and Applications”, edited by ed. Radhakanta Rana and Shiv Brat Singh

E. Billur, A.E. Tekkaya (2012), Chapter 3: Plastic Deformation: Strain and Strain Rate, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp 27-32

H. Palaniswamy, E. Billur (2012), Chapter 4: Plastic Deformation: Flow Stress, Anisotropy and Formability, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 33-52

E. Billur (2012), Chapter 9: Principles of Sheet Forming Presses, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 129-144

T. Yelich, E. Billur (2012), Chapter 10: Mechanical Presses for Sheet Forming, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 145-159

E. Billur (2012), Chapter 12: Hydraulic Presses, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 181-201

E. Billur (2012), Chapter 16: Die Materials and Coatings, "Sheet Metal Forming - Applications", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 317-338

Articles

E. Billur, B. Çetin, M. Gürleyik (2016), Yeni Nesil Yüksek Dayanimli Çelikler: Gelişmeler, Trendler ve Kısıtlar, International Journal of Scientific and Technological Research, Vol. 2, No: 1, pp 50-62