Yayınlar

SCI, SCI-E, SSCI ve AHCI

R Jafari, T Okutucu-Özyurt (2016), Numerical simulation of flow boiling from an artificial cavity in a microchannel, International Journal of Heat and Mass Transfer, 97, 270-278

Rahim Jafari, Tuba Okutucu-Özyurt, Hakkı Özgür Ünver, Özgür Bayer (2016), Experimental Investigation of Surface Roughness Effects on the Flow Boiling of R134a in Microchannels, Experimental Thermal and Fluid Science, 79, 222-230

R Jafari, T Okutucu-Özyurt (2015), Phase-Field Modeling of Vapor Bubble Growth in a Microchannel, The Journal of Computational Multiphase Flows, 7 (3), 143-158

Rahim Jafari, Tuba Okutucu-Özyurt (2015), 3D numerical modeling of boiling in a microchannel by arbitrary Lagrangian–Eulerian (ALE) method, Applied Mathematics and Computation, 272, 593-603

Aziz Koyuncuoğlu, Rahim Jafari, Tuba Okutucu-Özyurt, Haluk Külah (2012), Heat transfer and pressure drop experiments on CMOS compatible microchannel heat sinks for monolithic chip cooling applications, International Journal of Thermal Sciences, 56, 77-85

E. Billur, Y. Demiralp, A.R. Groseclose, T. Altan, B. Wadman (2011), Factors Affecting the Accuracy of Flow Stress Determined by the Bulge Test, Steel Research International, ICTP 2011 Special Edition, pp. 726-731

M. Koç, S. Mahabunphachai, E. Billur (2011), Forming characteristics of austenitic stainless steel sheet alloys under warm hydroforming conditions, Int. J. Adv. Manuf. Technol., Vol. 56, No: 1-4, pp. 97-113

M. Koç, E. Billur, Ö.N. Cora (2011), An experimental study on the comparative assessment of hydraulic bulge test analysis methods, Materials & Design , 32, pp 272-281

Bayka, D., Özdemir,A. (2010), Experimental Investigation Of Use Of Canola Oil As A Diesel Fuel, UMTIK 2010, 14th International Conference on Machine Design and Production

S. Nadimi, R.J. Khoushehmehr, B. Rohabi, A. Mostafapour (2008), Investigation and Analysis of Weld Induced Residual stresses in Two Dissimilar Pipes by Finite Element Modeling, Journal of applied Sciences, 8(6), 1014-1020

Bayka, D. (2005), Gasoline Engine With Low Emission And High Combustion Efficiency, 1st International Conference on Air Pollution and Combustion (CAPAC 2005)

Bayka, D. (1993), A Simulation Model For Calculating The Flame Propagation And Spatial Gas Composition In Spark Ignition Engines, Modelling, Measurement & Control, AMSE Press

Bayka, D. (1992), Performance And Emission Characteristics Of Diesel Engines With CNG And Pilot Injection, International Journal Of Energy - Environment - Economics

Bayka, D. (1992), Use Of Natural Gas In Motor Vehicles, International Journal Of Natural Gas Technology And Piping

Bayka, D. (1990), Improvement Of The Performance Of A Single Cylinder Spark Ignition Engine By Operational Factors, Journal Of Thermal Science And Technology

Bayka, D. (1981), Instantaneous Heat Transfer in a Single Stroke Rapid Compression Machine, METU, Journal of Pure and Applied Sciences

Diğer Hakemli Dergiler

Bayka, D., (2007), Doğal Gazın Taşıtlarda Yakıt Olarak Kullanımı, Doğal Gazın Taşıtlarda Yakıt Olarak Kullanımı, ankara, 1, pp

Bayka, D. (2007), Doğal Gazın Taşıtlarda Yakıt Olarak Kullanımı, LPG-CNG Kongresi, Makina Mühendisleri Odası

Uluslararası Konferans Bildirileri

E. Billur, B. Çetin, R.O. Uğuz, K. Davut, E. Arslan (2016), Advanced Material Characterization of TWIP Steels, in proceedings of New Developments in Sheet Metal Forming 2016 (NEBU 2016), Stuttgart, Germany, pp 303-318

E. Billur, G. Durkaya, B. Çetin, M.M. Yılmaz, A. Atay, A.G. Oğuz, O. Onaylı, U.C. Yalazı, E. Kılcı, (2016), Investigation of The Effect of Servo-Press Forming in Springback and Minimum Bending Radii of Ultra High Strength Steels, 17th International Conference On Machine Design And Production (UMTIK 2016), Bursa, Turkey

E. Billur, H. Porzner, D. Lorenz, M. Holecek, M. Vrojlik, M. Hoss, B. Damenha, J. Friberg, C. Koroschetz , M. Skrikerud (2015), From Concept to Virtual Reality: Virtual Hot Forming Engineering, Proceedings of 5th International Conference on Hot Sheet Metal Forming (chs2 - 2015), Toronto, ON, Canada, pp 463-470

E. Billur, B. Çetin, M.M. Yılmaz, A.G. Oğuz, A. Atay, K. Ersoy, R.O. Uğuz, B. Kaftanoğlu (2015), Forming of New Generation AHSS Using Servo Presses, Proceedings of 5th International Conference on Accuracy in Forming Technology (ICAFT 2015), Chemnitz, Germany, pp 175-191.

T. Pepelnjak, B. Baranoglu, E. Kayhan, B.Kaftanoglu (2015), Numerical Simulation of the Deep Drawing Process with Local Heating at the Flange Region, 8th International Conference and Exhibition on Design and Production of MACHINES and DIES/MOLDS 18-21 JUNE 2015 Pine Bay Holiday Resort, , Kusadasi, Aydin, TURKEY, 8, 43-50

Rahim Jafari, Tuba Okutucu-Özyurt (2015), CFD Modeling of Boiling in a Microchannel Based On Phase-Field Method, World Academy of Science, Engineering and Technology Conference, Paris- France

E. Billur (2014), Producing Ultra High Strength Automotive Components: Hot Stamping of Boron Alloyed Steels vs. Cold Stamping of New Generation Steels, 2nd International Metal Forming Conference (MetForm 2014), Ankara, Turkey

E. Billur, C. Wang, C. Bloor, M. Holecek, H. Porzner, T. Altan (2014), Advancements in Tailored Hot Stamping Simulations: Cooling Channel and Distortion Analyses, The 9th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2014), Melbourne, Australia, AIP Conference Proceedings, Vol. 1567 , pp. 1079-1084

Rahim Jafari, Tuba Okutucu-Özyurt (2014), The Arbitrary Lagrangian-Eulerian (ALE) Modeling of a Vapor Bubble Growth in a Microtube, International Conference of Numerical Analysis and Applied Mathematics, Rhodes- Greece

E. Billur, A. Groseclose, T. Mao, T. Altan (2013), Current Applications of FE Simulation for Blanking and Stamping of Sheet Materials, Tools and Technologies for Processing Ultra High Strength Steels, Graz, Austria, pp 221-238

E. Billur, H. Porzner, T. Altan (2013), Virtual Prototyping of Lightweight Designs Made with Cold and Hot Formed Tailored Solutions, 2nd World Congress on Integrated Computational Materials Engineering (ICME 2013), Salt Lake City, UT, USA, pp 49-54

T. Altan, A. Groseclose, E. Billur, S. Subramonian, T. Mao (2013), Advances and Challenges in Sheet Metal Forming Technology, 7th International Conference on Design and Production of Machines and Dies/Molds, Antalya, Turkey, pp 1-6

R. Perez-Santiago, E. Billur, A. Ademaj, C. Sarmiento, R. Berlanga, T. Altan (2013), Hot Stamping of a B-Pillar with Tailored Properties: Experiments and Preliminary Simulation Results, 4th International Conference on Hot Sheet Metal Forming (chs2 - 2013), Luleå, Sweden, pp 83-90

E. Billur, H. Porzner, M. Holecek, T. Altan (2013), Virtual Prototyping of Hot Formed Tailored Light-weight Designs, 4th International Conference on Hot Sheet Metal Forming (chs2 - 2013), Luleå, Sweden, pp 303-310

T. Altan, E. Billur, H. Porzner, D. Dooge, Y. Vincent, H. Porzner (2013), Concurrent Engineering with Hot and Cold Formed Tailored Solutions, International Automotive Body Congress (IABC 2013), Frankfurt, Germany, pp 91-112

Okutucu-Özyurt, T.,Külah, H., Koyuncuoğlu, A., Jafari, R (2012), Heat transfer enhancement with nanofluids in CMOS compatible microchannel heat sinks, 2nd Annual World Congress of Nanoscience and Nanotechnology Conference, Qingdao- China

M. Shah, E. Billur, P. Sartkulvanich, J. Carsley, T. Altan (2011), Cold and warm hydroforming of AA5754-O Sheet: FE Simulations and Experiments, The 8th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (NUMISHEET 2011), Seoul, S. Korea, AIP Conference Proceedings, Vol. 1383, pp 690-697

Bayka, D. (2010), Experimental Investigation Of Use Of Canola Oil As A Diesel Fuel, UMTIK 2010, 14th International Conference on Machine Design and Production

E. Billur, T. Altan (2010), Challenges in Forming Advanced High Strength Steels, New Developments in Sheet Metal Forming 2010, Stuttgart, Germany, pp 285-304

E. Billur, S. Mahabunphachai, M. Koç (2009), Formability of Austenitic Stainless Steels under warm hydroforming conditions, Transactions of NAMRI/SME, Clemson, SC, USA, Vol. 37, pp 341-348

E. Billur, M. Koç (2008), A comparative study on hydraulic bulge testing and analysis methods, ASME Conf. Proc., Manufacturing Science and Engineering Conference (MSEC 2008), Evanston, IL, USA, pp 59-65

Bayka, D., Mehdiyev,R.,Wolanski,P.,Güdü,T.,Arslan, H. (2005), Gasoline Engine With Low Emission And High Combustion Efficiency, 1st International Conference on Air Pollution and Combustion (CAPAC 2005), ankara, 1, pp

Bayka, D., Karel, A.,Çakar,D. (2005), Operation Of A Spark Ignition Engine With Superheated Fuel Vapor, The 18th Internal Combustion Engine Symposium, Society Of Automotive Engineers Of Japan, South Korea, 1, pp

Bayka, D. (2005), Operation Of A Spark Ignition Engine With Superheated Fuel Vapor, The 18th Internal Combustion Engine Symposium, Society Of Automotive Engineers Of Japan

Bayka, D., Karel, A.,Çakar,D. (2000), Determination of the Size of the Air Pollution Across Turkey Created by Vehicles in the Land Transport Sector, IASTED International Conference on Applied Simulation and Modelling, South Korea, 1, pp

Bayka, D. (2000), Determination of the Size of the Air Pollution Across Turkey Created by Vehicles in the Land Transport Sector, IASTED International Conference on Applied Simulation and Modelling

Bayka, D. (2000), A Reverse Engineering Method for Design of Engine Components, IASTED International Conference on Modelling and Simulation

Bayka, D. (1996), Simulation Of The Thermodynamic Cycle In A Spark Ignition Engine With Emphasis On Combustion Chamber Geometry, IASTED International Conference, Modelling and Simulation, Pittsburgh, USA

Bayka, D. (1996), Simulation Of The Thermodynamic Cycle In A Spark Ignition Engine With Emphasis On Combustion Chamber Geometry, IASTED International Conference, Modelling and Simulation

Bayka, D. (1995), Simulation Of Combustion Process In A Spark Ignition Engine On A Personal Computer, ECOS'95, Proc. of The Int. Conf

Bayka, D. (1994), The Performance Evaluation Of Engines Used in Ankara Natural Gas Conversion Project, The 4th Biennial International Conference & Exhibition On Natural Gas Vehicles

Bayka, D. (1994), Simple And Effective Solution To Smoke Emission From Buses For Developing Countries, 4th Biennial International Conference & Exhibition On Natural Gas Vehicles

Bayka, D. (1993), Thermal Boundary Layer Measurements Using A Multiple Thin Wire Resistance Thermometer In An Internal Combustion Engine, Third World Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics

Bayka, D. (1992), Conversion Of A City Bus To Dual Fuel And Evaluation Of Its Performance, IGRC 92, 1992 International Gas Research Conference

Bayka, D. (1991), Effect of Inlet Manifold Design and Increase of Compression Ratio on the Performance and Exhaust Emissions of a 1300 cc SI Engine using Methanol-Ethanol-Water-Gasoline Blends, 9th Miami International Congress on Energy and Environment, Environment and Energy

Bayka, D. (1991), Operation Of A Diesel Engine With Compressed Natural Gas, Symposium on the Use of CNG and LPG as Fuel for Internal Combustion Engines

Bayka, D. (1983), A Droplet Evaporation Rate Controlled Combustion Model, AGARD, Combustion Problems in Turbine Engines

Bayka, D. (1982), Instantaneous Heat Transfer in a Single Stroke Rapid Compression Machine, ASME Heat Transfer Conference

Ulusal Konferans Bildirileri

Bayka, D. (2000), A Reverse Engineering Method for Design of Engine Components, IASTED International Conference on Modelling and Simulation, Pittsburgh, USA

Kitapta Bölüm

E. Billur (2016), Chapter 12: Hot Formed Steels, “Automotive Steels - Design, Metallurgy, Processing and Applications”, edited by ed. Radhakanta Rana and Shiv Brat Singh

E. Billur, A.E. Tekkaya (2012), Chapter 3: Plastic Deformation: Strain and Strain Rate, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp 27-32

H. Palaniswamy, E. Billur (2012), Chapter 4: Plastic Deformation: Flow Stress, Anisotropy and Formability, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 33-52

E. Billur (2012), Chapter 9: Principles of Sheet Forming Presses, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 129-144

T. Yelich, E. Billur (2012), Chapter 10: Mechanical Presses for Sheet Forming, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 145-159

E. Billur (2012), Chapter 12: Hydraulic Presses, "Sheet Metal Forming - Fundamentals", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 181-201

E. Billur (2012), Chapter 16: Die Materials and Coatings, "Sheet Metal Forming - Applications", edited by T. Altan & A.E. Tekkaya, ASM International., pp. 317-338

Makaleler

E. Billur, B. Çetin, M. Gürleyik (2016), Yeni Nesil Yüksek Dayanimli Çelikler: Gelişmeler, Trendler ve Kısıtlar, International Journal of Scientific and Technological Research, Vol. 2, No: 1, pp 50-62